0 medlemmar och 1 gäst tittar på detta ämne.
Ok fast vvberedaren är ju bara en burk med anslutningar o måste väl gå lika bra o ansluta till vilken pump som helst?~40k är ju iofs inte så blodigt. Men en kompressor borde vara rätt billigt om det skulle gå o byta till en modell större i befintlig maskin?
The Digital Scroll operates in two stages – the “loaded state”, when the solenoid valve is normally closed (0 V to solenoid coil) and “unloaded state”, when the solenoid valve is open (220 V to solenoid coil). During the loaded state the compressor operates like a standard scroll and delivers full capacity and mass flow. However, during the unloaded state, there is no capacity and no mass flow through the compressor and during the unloaded stage the compressor consumes only 10% of the full load power. So in a 10 seconds cycle time, if the loaded state time is 2 seconds and the unloaded state time is 8 seconds, the compressor modulation is (2 seconds x 100% + 8 seconds x 0%)/ 10 = 20%. If for the same cycle time, the loaded state time is 5.0 seconds and the unloaded state time is 5.0 seconds, the compressor modulation is 50%. The capacity is a time averaged summation of the loaded state and unloaded state. By varying the loaded state time and unloaded state time, any capacity (10%-100%) can be delivered by the compressor.