Skrivet av: Västerhaninge 17
« skrivet: 07 oktober 2022, 15:54:40 »Sound muffler on the exhaust air strange .
The plastic around the insulation must be 100% airtight .
The plastic around the insulation must be 100% airtight .
Skrivet av: Västerhaninge 17« skrivet: 07 oktober 2022, 15:54:40 »Sound muffler on the exhaust air strange .
The plastic around the insulation must be 100% airtight . Skrivet av: Throwback« skrivet: 06 oktober 2022, 15:13:33 »Thanks, I will measure to be sure - I also see that I have a sound muffler/silence above the hallway, i suppose it is larger than the rest of the ventilation pipe. How do you insulate that?
Skrivet av: Västerhaninge 17« skrivet: 06 oktober 2022, 13:58:10 »Armaflex is condensation safe, but expensive. Hard to tell if you have 160mm or 125mm vent pipes.
There is insulation for both variants. Skrivet av: Throwback« skrivet: 06 oktober 2022, 13:43:51 »Thanks for your answer, I went up in the attic now and it is just aluminum foil around it, no insulation, so it must be done.
I read about armaflex also, would that be easier to use, than the one you linked? Should I measure the pipe width or will it be 160mm that you linked me to? Perhaps someone has a guide on how to terminate in the roof and at the heatpump? Skrivet av: Västerhaninge 17« skrivet: 06 oktober 2022, 13:08:32 »You need at least a PE30 (30 mm insulating) insulating sock for the Nibe 730 .
https://www.ventilationsbutiken.se/sv/artiklar/isolerstrumpa-pe30-160mm-m.html Skrivet av: Throwback« skrivet: 06 oktober 2022, 11:29:21 »I live in a villa built in 2006 and we have a Nibe 310P. We are thinking of changing to F730, but not sure if we have insulated exhaust ventilation - the plans say we do but I am not sure if it is so in the walls and at the pump. I have a visual confirmation in the cat vind, however.
Here is higher resolution picture of the plan, i have seen that some plans contain the word the whole way up, which our doesn't which also make me suspicious. https://www.dropbox.com/s/dy3m0tfipzue26x/2022-10-04%2021.47.50.jpg?dl=0 What do you think? |