Skrivet av: MarkAswyn
« skrivet: 04 december 2011, 14:29:22 »Exactly, why use the complex control system of the VVM 300 if you have a simple roomthermostat which is simply measuring the temperature in the room and switching the value to 'ask for heat' or 'stop heating'. I have bought a wifi enables roomthermostate in order to control my system when I am in Holland, but I can find no way of bypassing the complex control system of the VVM 300 which is based upon the outside temperature and heatcurves. I can accept that the outside temperature decides what the flow temperature of the heating water is, but I want to control the rest with my roomthermostat. When the temperature in the room in lower than the set temperature on the thermostat the VVM 300 must produce heat to the ratiators. When the set temperature has been reached and the roomthermostat is sending the 'stop signal' to the VVM 300 it whould then stop sending hot water in the system. But it seems to be impossible to bypass the complex control system of the VVM 300, result is that the temperature can not be correctly controlled with the roomthermostat.
I hope I am wrong and maybe I must change some of the settings in the VVM 300. Who is able to assist me with this?
Mark
I hope I am wrong and maybe I must change some of the settings in the VVM 300. Who is able to assist me with this?
Mark
gäster: 805
dolda: 1
användare: 15
