Värmepumpsforum allt om värmepump och värmepumpar
VärmepumpsForum Allmänt => Värmepumpar - Märkesspecifikt => Värmepumpar - Mark/Berg och Sjövärmepumpar. => Värmepumpar och installationsfrågor. => IVT => Ämnet startat av: fulda skrivet 11 mars 2010, 10:48:21
-
Hi All,
is there anybody in the forum who have Rego 600 version 3.01 or 3.02 and have working StatLink?
(tis version was produced approx 4~5 years ago)
or - is there anybody who have this version and have no StatLink?? (and want to have it a:gl )
(someone who have mobile phone with camera/or camera and will be able to send me photos quickly :D )
google translator
Finns det någon i forumet som har Rego 600 v. 3.01 eller 3.02 och har arbetar StatLink?
(tis version producerades ca 4 ~ 5 år sedan)
eller - är det någon som har denna version och har inga StatLink?? (och vill ha det a:gl )
(någon som har mobiltelefon med kamera eller kamera och kan skicka mig bilder snabbt :D )
-
I have version 3.02 with a working Statlink interface (also tried your perl program and got it to work).
What kind of pictures do you want?
-
I have version 3.02 with a working Statlink interface (also tried your perl program and got it to work).
What kind of pictures do you want?
OK - StatLink working on default settings?
You can use "remote display"?
What pump you have? Greenline? Optima?
What is on your default display? Like this? In my example I have Rego636MBK - what you have?
Rego636MBK ###
###### ##:##:## ##
Värme Info Meny
Rego636MBK ###
###### ##:##:## ##
Heat Info Menu
Can you take me a picture of first page on display in silent state? And if you have opened heatpump - at the top of rego is tie-on label - can you take me a picture of it? How old your heatpump is? (I expect 4~5 years)
Thank you
-
The default display looks like your, but instead of Rego636MBK I have Rego634;
Rego634 ###
###### ##:##:## ##
Heat Info Menu
I'll get back with pictures later on today.
-
I have version 3:05 and uses StatLink
Can use the remote's display
-
The default display looks like your, but instead of Rego636MBK I have Rego634;
Rego636 ###
I'll get back with pictures later on today.
OK - that is I'm looking for. What pump you have?
And have you Czech/Cesky language in menu 5.8?
-
I have version 3:05 and uses StatLink
Can use the remote's display
Yes, 5.05 is OK, there are differences in 3.01 and 3.02, some of not working with statlink well.
-
The default display looks like your, but instead of Rego636MBK I have Rego634;
Rego636 ###
I'll get back with pictures later on today.
OK - that is I'm looking for. What pump you have?
And have you Czech/Cesky language in menu 5.8?
I have Auto Term and no Czech at 5.8 available.
-
Now I tried Statlink and it can control the display (Rego634 and version 3.02).
Also looked at the menu language, and I dont have Czech in 5.8 (only have swedish).
The pump is a IVT Greenline HT9 and it is about 6 years old.
Something is wrong with my camera, so I cant get out any pictures. However on top of the Rego I have;
A green label with R134a
A white label with;
IVT Rego634
30-302-02662
<barcode>
(30)30202682