Now I tried Statlink and it can control the display (Rego634 and version 3.02).

Also looked at the menu language, and I dont have Czech in 5.8 (only have swedish).

The pump is a IVT Greenline HT9 and it is about 6 years old.

Something is wrong with my camera, so I cant get out any pictures. However on top of the Rego I have;

A green label with R134a

A white label with;
IVT Rego634
    30-302-02662
<barcode>
(30)30202682

I have version 3:05 and uses StatLink
Can use the remote's display

Yes, 5.05 is OK, there are differences in 3.01 and 3.02, some of not working with statlink well.

I have version 3:05 and uses StatLink
Can use the remote's display

I have version 3.02 with a working Statlink interface (also tried your perl program and got it to work).
What kind of pictures do you want?

OK - StatLink working on default settings?
You can use "remote display"?
What pump you have? Greenline? Optima?

What is on your default display? Like this? In my example I have Rego636MBK - what you have?
     Rego636MBK ###

 ###### ##:##:## ##
Värme   Info    Meny

     Rego636MBK ###

 ###### ##:##:## ##
Heat    Info    Menu

Can you take me a picture of first page on display in silent state? And if you have opened heatpump - at the top of rego is tie-on label - can you take me a picture of it? How old your heatpump is? (I expect 4~5 years)

Thank you

Hi All,

is there anybody in the forum who have Rego 600 version 3.01 or 3.02 and have working StatLink?
(tis version was produced approx 4~5 years ago)

or - is there anybody who have this version and have no StatLink?? (and want to have it  )
(someone who have mobile phone with camera/or camera and will be able to send me photos quickly  )

google translator
Finns det någon i forumet som har Rego 600 v. 3.01 eller 3.02 och har arbetar StatLink?
(tis version producerades ca 4 ~ 5 år sedan)

eller - är det någon som har denna version och har inga StatLink?? (och vill ha det )
(någon som har mobiltelefon med kamera eller kamera och kan skicka mig bilder snabbt )